Automated Sliding Door Hardware

V-Belt Slide Door Operator

V-Belt Slide Door Operator

(Left-hand shown)

Electrical Specification

  • High Starting Torque Motor, Removable without affecting Limit Switch Setting
  • Full Overload Protection
  • 24 VAC Control Circuit
  • Heavy Duty, Full Voltage, Reversing Contactor
  • 3 Button NEMA 1 Control Station Included
  • Pre-wired for 3 Button Station, Pull Cord Station, and Automatic Reversing Equipment
  • Solid State Standard except on 460 Volt

Mechanical Specifications

  • Disconnect Mechanism for Manual Operation
  • #41 Roller Chain Drive
  • 10:1 Gear Reducer (Oil Bath Type)
  • Heavy Duty Ball Bearing Final Drive Mechanism
  • Double Shoe Solenoid Brake
  • Door Speed Approximately 7″ Per Second

Gearhead Slide Door Operator

Gearhead Slide Door Operator

(Left hand shown)

Electrical Specification

  • High Starting Torque Motor, Removable without affecting Limit Switch Setting
  • Full Overload Protection
  • 24 VAC Control Circuit
  • Heavy Duty, Full Voltage, Reversing Contactor
  • 3 Button NEMA 1 Control Station Included
  • Pre-wired for 3 Button Station, Pull Cord Station, and Automatic Reversing Equipment

Mechanical Specifications

  • Disconnect Mechanism for Manual Operation
  • #41 Roller Chain Drive
  • Heavy Duty V-Belt and Chain/Sprocket Reduction
  • Solenoid Brake
  • Adjustable Torque Limiting Clutch
  • Positive Chain Driven Rotary Limit Switches
  • Door Speed Approximately 7″ Per Second

Model SD Commercial Door Operator with Logic 4.0

Adobe_PDF_icon_100 Download the PDF file for more detailed information about the Model SD Commercial Door Operator with Logic 4.0.

Logic 4.0 technology provides primary monitored entrapment protection; a required safety regulation. It is UL325-2010 Compliant.

This insures that the appropriate safety devices, either a monitored photo sensor or monitored sensing edge, are functional in all operator formats.

The innovative design of Logic 4.0 also provides exceptional value, featuring a broad range of standard features, and all Logic 4.0 commercial door operators are engineered, manufactured and tested to provide reliable service and meet the requirements of the toughest commercial applications. This automated sliding barn door provides Compliance, Value and Convenience.

Standard Features

  • UL325-2010 Monitored Entrapment Capability – Provides primary monitored entrapment protection through monitored photo sensors, either CPS-U or CPS-UN4, or a 4-wire monitored edge, using the CPS-EI interface
  • UL-Listed and UL-Labeled to insure compliance to local codes and approval at final inspection
  • Built-in 3-channel, 315MHz radio receiver
  • Seven field-selectable operator wiring formats via on-board selector switch
  • Integrated Timer-To-Close – Programmable in 1-second and 15-second increments; allows for timed automatic door closure after the door reaches the full open position
  • Programmable mid-stop, which permits an automatic stop between full close and full open, and maximum run timer, that prevents motor overrun and damage to the door and/or operator
  • Maintenance Alert System™ – Establish a routine maintenance schedule based on number of door cycles and/or calendar date; includes a self-diagnostic system for easy troubleshooting
  • For single and bi-parting doors
  • Solenoid brake
  • #41 roller chain
  • Heavy-duty hanger brackets
  • Durable disconnect mechanism
  • 115V, 208/230V, 460V, 575V, 24V NEC
    Class 2 Circuit with 40VA transformer

Contact Us

CALL Specialty Doors at 1-866-815-8151 or

For fast service and unbeatable prices, fill out the request below and we'll get back to you with quotes for available options.