Flat Track Hardware

Flat Track Hardware Medium Duty \| Heavy Duty	click on the image for a larger view
	click on the image for a larger view
Enlarge Image	Barn Door Rollers with five spokes. Castings for wheels are ductile iron – center pin is stainless steel. These Barn Door Rollers are replicas of the beautiful old barn door rollers and track so common years ago. Ductile iron rollers come in three sizes. Black powder-coated with stainless steel pins and cast iron track standoffs.
Enlarge Image	Five spokes. Castings for wheels are ductile iron – center pin is stainless steel. Replicas of beautiful old barn door rollers and track so common years ago. Ductile iron rollers in three sizes; black powder-coated with stainless steel pins and cast iron track standoffs.
Enlarge Image	Solid wheel. Castings for wheels are ductile iron – center pin is stainless steel. Replicas of beautiful old barn door rollers and track so common years ago. Ductile iron rollers in three sizes; black powder-coated with stainless steel pins and cast iron track standoffs.
Enlarge Image	Enlarge Image
Track for Antique Barn Door Rollers in 6 ft. lengths. Usually the track used is approximately double the width of the door.	Track for Antique Barn Door Rollers in 8 ft. lengths. Usually the track amount used is approximately double the width of the door.

Reproduction Antique Barn Door Hardware

Our heavy-duty hardware replicates original hardware is use since the 1800′s. Roller assembly and hardware are made from steel and machined castings with a stainless steel axle.

Large and medium roller wheels have 5 spokes while small wheels are solid. Track is 1/4″ x 1-1/4″ steel bar stock. Track standoffs are machined castings. Finish is black, exterior grade, powder coat. Hardware is suitable for doors up to 2″ thick. Track standoffs can be padded out if needed to accommodate thicker doors. Various applications require different fasteners so customer is to supply fasteners and the through bolts.

Large	11-1/2″ wide
Medium	9-1/2″ wide
Small	7-1/2″ wide

Track Information

- 6′ lengths of track require 7 standoffs – 8′ lengths of track require 9 standoffs – Track length needs to be approximately twice the width of the door

MEDIUM DUTY (Click on image to enlarge)

Arrowhead Hanger

Click image to enlarge

Click image to enlarge

Click image to enlarge

Flat Track Hardware Bi-Parting Doors	Flat Track Hardware Sgl. Slider

Flat Track w/ ‘Horseshoe’ Hanger

Concealed Stay Roller

Flat Track & Hanger Head Section Detail

Concealed bottom guide

To order medium duty flat track hardware or for answers to any questions you may have call 1-866-815-8151 or click here to request a quote.

HEAVY DUTY
No. 102 Flat Track Hanger Assembly
Use: On Richards-Wilcox flat steel bar track which projects a minimum 1 15/16″ (face of wall to centerline of wheel) for manually operated doors 1 5/8″ to 2 1/2″ thick weighing up to 800 lbs. Two Styles: 0102.00075 for doors up to 1 5/8″ thick 0102.00076 for doors up to 2 1/2″ thick Head Clearance: From top of track to top of truck/hanger assembly, 5 3/8″. Construction: Wheels 4″ tread diameter-gray iron; roller bearings, apron- 3/8″ x 3 1/2″ x 21″ steel. Finish: Painted. Click here for Detailed Specifications	0102.00075 0102.0076

To order heavy duty flat track hardware or for answers to any questions you may have call 1-866-815-8151 or click here to request a quote.
Not the type of door hardware you were looking for? We also offer sliding door hardware, tubular track hardware, and stainless steel door hardware.

Reproduction Antique Barn Door Hardware

Our Sites